P L U S S O U N D

Introducing
Next Generation
Custom Bluetooth Cables
For IEMs + Headphones



Redesigned Module

Built from the ground up, we implemented the latest features, along with unique and innovative ones to an all-new module design that vastly surpasses our original and all others on the market.

BT Version 5.0

Now using the latest bluetooth technology that improves power, range, connectivity, and reliability.

Complete Codec Support

Our new module supports all codecs, including SBC, AAC, aptX, aptX-LL, and the newest addition, aptX-HD.

LDAC Support

We are proud to announce that we have partnered with Sony in bringing their proprietary LDAC to our custom cables. This audiophile-grade codec offers up to 990kbps for hi-res wireless performance.



USB DAC/AMP

Not only can you charge via computer, you can connect to it and listen to your music and videos. Supports up to 24 bit / 96kHz and no software or firmware necessary.

Hybrid Functionality

Our custom cables can connect up to three sources at the same time - two via bluetooth, one via computer/source. Play audio from one source and switch to another without any hassle. It's that simple.

Larger Battery

Even with a slightly smaller module, we managed to increase the battery capacity by over 20% from our original so you can enjoy your music uninterrupted even longer.

LED Indicators

We felt one was not enough, so we incorporated three LED indicators. One for power/battery life and two for each paired device. This makes it easier to know which device is paired, which device is out of range or disconnected, and how much battery the module has left without the need to check your mobile screen.



USB Type C

We've added the latest USB for faster charging. Don't worry, you'll be able to use the module at the same time, whether it is USB DAC or Bluetooth.

Two-Button Commands

Hold two buttons in combination to enable or disable features such as LED lights or removing paired list.

Pair button

A dedicated pair button has been added to connect existing and new devices while avoid pressing unintended commands.

Microphone

Now moved to the bottom front to be as close to the mouth as possible. Users on the other end will be able to hear you more clearly. This includes voice commands via Siri, etc.



Hard Reset

Next to the pair button is a hard reset if you ever wish to redo your settings quicker and start fresh again.

Balanced Configuration

Just like 2.5mm and 4.4mm terminated cables, our custom bluetooth cables are also balanced for better quality sound and performance.

Cable Styles

You can now choose where you want the module to be placed on your cable. You can select Default (located on the right side) or Pendant (center of the cable).

UP-OCC Wiring

All custom bluetooth cables feature our award-winning, high quality signature UP-OCC wires using Type 6 litz design with special dampening cores for premium performance and our proprietary PS insulation that is durable, flexible, and soft.



In-House Designed Connectors

Our PS designed connectors features high quality gold plated copper based contacts with thick anodized aluminum enclosure to ensure the best quality product possible. Available in 2-pin, MMCX, A2DC, IPX/T2, HD8XX, Audeze, and many more.

Interchangeable Sliders

For default style, use the included anodized aluminum cable slider at any time to adjust fit. They are easily removable and can be interchanged for the different color or size.

Handcrafted in the USA

Design and assembly continue to be performed in-house in Los Angeles, California, USA.

Packaging

All orders come with the following: Microfiber cloth, leather cable band, leather cable pouch, Digital Start Guide, and a complimentary 4' USB Type C to USB Type A cable.

Preorders begin
November 15
12AM PST
First come, first serve.
Be sure to come back In time to be one of the first to own.

Preorders start shipping in
Late January

Estimated processing time for new preorders
8 weeks

S E R I E S _ L I N E U P

Need help choosing the best wire for your BT cable? Click here to read review excerpts for every wire option we offer.

C O M P A T I B I L I T Y _ L I S T

PS 0.78mm / 2-Pin / CIEM > JH Audio, 1964 Ears/64 Audio, Unique Melody, Earsonics, Kozee, Stage 93, Aurisonics (ASG-1.5, ASG-2.5), Heir Audio, Compact Monitors, Future Sonics, Gorilla, Alien Ears, Alclair, Dream Earz, Clear Tune Monitors, Frogbeats, Rhapsodio, Tralucent Audio, Spiral Ear, Vision Ears, Rooth, Noble Audio, InEar, Lear, Lime Ears, Rhines, CanalWorks, EarWerkz/Empire Ears, InEarz, Eartech Music, Advanced Ears, Cosmic Ears, Hidition, Cypher Labs, Stage93, iBasso, Oriolus, Asius Technologies, Aroma Audio, Cowon (X40), Westone (UM3RC, UM3X, W4R, ES Series, AC Series, UM2 Series), Audeze (iSine 10, iSine 20, iSine LX, LCDi4), Fender, FAudio, Jomo Audio, AAW, Moondrop
[Our 2-pin connectors will work on any IEM with non-recessed (flush) and recessed sockets]

PS MMCX > Shure (SE215, SE315, SE425, SE535. SE846) Ultimate Ears (UE900), Westone (UM PRO 10, 20, 30, 50, W10, W20, W30, W40, W60, W80, ES50, ES30, ES20, ES10, AC20, AC10, S Series, Am Pro 10, Am Pro 20, Am Pro 30), Sensaphonics, Earsonics (S-EM9), Cosmic Ears, InEarZ, Audiofly (AF120, AF140, AF160, AF180), Fidue (A83), VSonic (VSD3S), Ultrasone (IQ), JVC (HA-FX850, Solidege), Campfire Audio (Lyra, Orion, Jupiter, Nova, Andromeda, Lyra II, Dorado, Vega, Atlas, Comet, Solaris, Equinox), Fender (DXA1, FXA2, FXA2, FXA5, FXA6, FXA7), Aurisonics (Harmony, Forte, Eva, Kicker), Onkyo (E900M), Oriveti (Primacy), HUM (Pristine), Trinity (Atlas), Earnine (EN2), MusicMaker (TK12s), ZhiYin (QT5), AKG (N40, N30), Fostex (TE04), Acoustune, Pioneer (SE-CH9T-K), Radius, Shinola (Canfield, Canfield Pro), LZ (A3, A4, A5), Light Harmonic (Stella), PLUSSOUND (Spectrum, Prism, Gamut), Fiio, Akoustyx

PS IPX/T2 > Ultimate Ears (2018-19 models), InEarz (2019 models), ACS

PS A2DC > Audio-Technica (EP-CP, ATH-E40, ATH-E50, ATH-E70, LS200, LS300, LS400, HDC313A, CKR90, LS50, LS70, CKS1100)
Extruded > Unique Melody, Ultimate Ears, QDC

0.75mm > Ultimate Ears (Triple.Fi 10 Pro, Super.fi 5 Pro, Super.fi 3 Studio), Altec Lansing (UHP336), M-Audio (IE 10, IE 20XB, IE 30, IE 40), Nuforce (HEM2, HEM4, HEM6, HEM8)

Sennheiser > IE7, IE8, IE80, IE40, IE400, IE500

FitEar > MH-NH205, MH334, MH335DW, ToGo 334, Private 222, Private223, Private 333, Parterre, Fitear, Monet 17, Air, Aya, Fostex (TE100)

Audio Technica > ATH-IM50, ATH-IM70, ATH-IM01, ATH-IM02, ATH-IM03, ATH-IM04

Sony > XBA Series, MDR-EX600, MDR-EX800, MDR-EX1000, MDR-7550, IER-Z1R, IER-M9, IER-M7

Etymotic > ER4B, ER4PT, ER4S, ER6I, ER4, ER4SR, ER4XR

JH Audio > 2-pin, 4-pin, Siren/Performance (with and without adjusters)
  • PS 2-Pin / 0.78mm / CIEM

    PS 2-Pin / 0.78mm / CIEM

  • PS MMCX

    PS MMCX

  • PS A2DC

    PS A2DC

  • Sony (MDR-EX)

    Sony (MDR-EX)

  • Audio Technica (IM Series)

    Audio Technica (IM Series)

  • MMCX (Sony)

    MMCX (Sony)

  • MMCX (Westone)

    MMCX (Westone)

  • MMCX (AKG N Series)

    MMCX (AKG N Series)

  • Extruded (UM/UE)

    Extruded (UM/UE)

  • FitEar

    FitEar

  • Sennheiser (IE8/IE80)

    Sennheiser (IE8/IE80)

  • JHA 4-Pin

    JHA 4-Pin

  • Etymotic (2-Pin)

    Etymotic (2-Pin)

  • Etymotic (MMCX)

    Etymotic (MMCX)

  • 0.75mm

    0.75mm

  • PS IPX/T2 (for latest UE and InEarz)

    PS IPX/T2 (for latest UE and InEarz)




  • HD8XX (Sennheiser, Campfire, EnigmAcoustics)

    HD8XX (Sennheiser, Campfire, EnigmAcoustics)

  • 4-Pin Mini XLR (Audeze, ZMF, Meze, Kennerton)

    4-Pin Mini XLR (Audeze, ZMF, Meze, Kennerton)

  • Extended 3.5mm (Single sided and Dual)

    Extended 3.5mm (Single sided and Dual)

  • Dual 2.5mm Mono (Sennheiser, HiFiMan, Oppo, etc)

    Dual 2.5mm Mono (Sennheiser, HiFiMan, Oppo, etc)

  • Single 2.5mm (L Lock)

    Single 2.5mm (L Lock)

  • MrSpeakers

    MrSpeakers

  • 3-Pin Mini XLR (Single sided and Dual)

    3-Pin Mini XLR (Single sided and Dual)

  • HD6XX (Sennheiser, Fostex)

    HD6XX (Sennheiser, Fostex)

  • AKG K8XX

    AKG K8XX

  • Focal Utopia

    Focal Utopia

Sennheiser > HD5XX (HD518/HD558/HD598, Momentum) HD6XX (HD580/HD600/HD650/HD660S) (Also compatible with: Fostex TH-900 MKII, TH610, TH909), HD700, HD800/HD800S/HD820 (Also compatible with: EnigmAcoustics Dharma, Campfire Audio Cascade)

AKG > K 141 MK II, K 171 MK II, K 181 DJ, K 240, K 240 MK II, K 271 MK II, K702, Q701, K712, K7XX [Also compatible with: Pioneer (RHP-20, HDJ-2000), Beyerdynamic (DT1170 Pro)], K812, K872

HiFiMan (SMC) > HE-5, HE-5LE, HE-6, HE-300, HE-400, HE-400i, HE-500, HE-560

Audeze > LCD (LCD-2, LCD-3, LCD-4, LCD-X, LCD-XC, LCD2C, LCD-MX4, LCD-GX) [Also compatible with ZMF (Blackwood, Vibro, Omni, Atticus, Eikon, Auteur), Kennerton (Vali, Odin), Meze Audio (Empyrean)], EL-8 (Open, Closed), Sine

MrSpeakers > Mad Dog, Mad Dog Pro, Alpha Dog, Alpha Prime, Ether, Ether C, Ether Flow, Ether C Flow, Aeon

Dual 2.5mm > Oppo (PM-1, PM-2), Sennheiser (HD700), HiFiMan (HE-350, HE-400i, HE-400 S, HE-560, HE-1000, Edition X, Edition S, Susvara), Audioquest (Nighthawk, NightOwl)

Single 3.5mm > Ultrasone (PROline/PRO models (PRO 550, PRO 650, PRO 750, PRO 900, PRO 2500, PRO 2900), DJ1 PRO, HFI-2200/2400, Equation Audio (RP-21x, RP-22x, RP-15MC), Sony (MDR-NC500D/MDR-NC200D/MDR-NC60/MDR-NC600D/MDR-1R/MDR-Z100), M-Audio (Studiophile Q40), Oppo (PM-3), Beyerdynamic (Custom One Pro), Philips (Fidelio X1, X2), Master & Dynamic (MH30, MH40), Focal (Spirit, Listen)

Dual 3.5mm > Denon (AH-D600, AH-D7100, AH-D7200), Sony (MDR-Z7, MDR-Z1R), Beyerdynamic (T1 2nd Gen, T5 2nd Gen), JVC (HA-SW01/Wood 1, HA-SW02/Wood 2), McIntosh (MHP1000), Final Audio Design (Pandora, Sonorous, Hope, D8000), Klipsch (Heritage HP-3), Focal (Elear, Clear, Elex, Clear Pro, Elegia, Stellia), Pioneer (SE-Monitor 5), Onkyo (A800), HiFiMan (Ananda, HE-5SE, HE-6SE, HE-1000SE, Sundara, Arya)

MMCX > Ultrasone (Edition 5, Edition 8), Shure (SHR1440, SHR1840), Pioneer (SE-Master1)

Dual 3-Pin Mini XLR > JPS Labs (Abyss AB-1266)

LEMO > AKG (K812), Focal (Utopia)


Recabling/Hardwiring services available for the following:

Grado > SR60 SR60i, SR80, SR80i, SR125, SR125i, SR225, SR225i, SR325, SR325i, RS1, RS1i, RS2, RS2i, GS1000, GS1000i, MS1, MS1i, MS2, MS2i, MSpro, etc.
Denon > AH-D2000, AH-D5000, AH-D7000
AKG > K501, K701
Beyerdynamic > DT770, DT880, DT990, T1, T5P
If you have a different headphone that needs recabling, contact us for info.

Looking for headphone adapters? Visit our Interconnect Cables page for options.

Product Teasers